|Machining range (X × Y)|
|550 × 380mm|
|φ0.1 ∼ φ3.0mm|
|Immersion machining in water|
|Machining immersed in water reduces the effects of heat.|
LH-35θ rotating head (NC-B axis)
Machining can be performed by angling the electrode while the workpiece remains fixed.
RT250N-20 / RT300N-50 immersion tilt-turn table (NC-AB axes)
When used in combination with the CT500FX, this immersion tilt-turn axis system is ideal for machining of polygon micro holes.
ESF24 / ESF36 / ESF48 automated electrode change system
Electrodes are changed automatically, for long-term unmanned operation with no wasted time.
GSF4 or GSF6 automated guide change system
Electrode guides are changed automatically for fully automated machining of holes with different diameters.
SF02FX micro hole machining power unit (and other special parts for micro machining)
Allows machining with φ0.1 - φ0.05 electrodes.
|Machining fluid||-||DI water|
|Work table size (W × D)||(mm)||550 × 400|
|Machining tank size (W × D)||(mm)||800 × 600|
|Left-right (X) and front-back (Y) movement distance||(mm)||550 × 380|
|Workpiece maximum load weight||(kg)||300|
|Main shaft up-down movement distance||(mm)||400 (MT40) / 450 (MT50)|
|Electrode guide up-down movement distance||(mm)||280 (MT40) / 550 (MT50)|
|Maximum distance between work table and guide||(mm)||335 / 320 (when ESF is installed)|
|Diameter of installed electrodes||(mm)||φ0.1 ∼ φ3.0 (△φ3.1 ∼ φ6.5)|
|Maximum length of installed electrodes||(mm)||
450 / 400 - when ESF is used (MT40)500 / 450 - when ESF is used (MT50)
|List of other options|
|Column extension||Extends the distance between the work table and guide.|
Machining fluid circulation system (350 L)DI water supply system that improves performance during high-precision machining.
|Operation lamps||3-color signal lamps (Ready / Auto / Alarm)|
|KC77||Machining fluid cooling system|
|Hand pulser||Allows axis feed and positioning with the manual handle.|