|Machining range (X × Y)|
|1600 × 700mm|
|φ0.3 ∼ φ3.0mm|
|Immersion machining in water|
|Machining immersed in water reduces the effects of heat.|
LH-35θ / LH-45θ rotating head (NC-B axis)
Machining can be performed by angling the electrode while the workpiece remains fixed.
RT500N-100 immersion titl-turn table (NC-AB axes)
When used in combination with the CT1600FX, this immersion tilt-turn axis system is ideal for machining of polygon micro holes.
ESF24 or ESF36 / ESF48 automated electrode change system
Electrodes are changed automatically, for long-term unmanned operation with no wasted time.
GSF4 or GSF6 automated guide change system
Electrode guides are changed automatically for fully automated machining of holes with different diameters.
|Machining fluid||-||DI water|
|Work table size (W × D)||(mm)||950 × 780|
|Machining tank size (W × D)||(mm)||1300 × 1250|
|Left-right (X) and front-back (Y) movement distance||(mm)||1600 × 710|
|Workpiece maximum load weight||(kg)||1000|
|Main shaft up-down movement distance||(mm)||450|
|Electrode guide up-down movement distance||(mm)||550|
|Maximum distance between work table and guide||(mm)||930|
|Diameter of installed electrodes||(mm)||φ0.3 ∼ φ3.0 (△φ3.1 ∼ φ6.5)|
|Maximum length of installed electrodes||(mm)||500 / 450 - when ESF is used (MT50)|
|List of other options|
|Column extension||Extends the distance between the work table and guide.|
|CWP150||Machining fluid circulation system (1500 L)
DI water supply system that improves performance during high-precision machining.
|Operation lamps||3-color signal lamps (Ready / Auto / Alarm)|
|KC177||Machining fluid cooling system|
|Hand pulser||Allows axis feed and positioning with the manual handle.|